Sodium Acetate Anhydrous Trihydrate Crystals Pure & IP BP Ph Eur USP ACS AR Analytical Reagent FCC Food Grade Manufacturers |
Muby chemicals, is the flagship company in Mubychem Group, established in 1976, It has several manufacturing units in its wings, making Chemicals including Sodium Acetate Anhydrous Trihydrate, Pharmaceutical Excipients & Flavour Chemicals in India. Mubychem Group has manufacturing facilities spread across Western India and sales purchase agents in several countries. The associated manufacturing units are accredited with certifications like FDA cGMP and GLP Approval, ISO-9001 ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Certification, "REACH" registration, Kosher, Halal & HACCP Certification. |
| We are chemical supplier exporter to almost every country and have a representatives in major business areas. We serve from small packs to container loads. |
-------- 
CAS Number Anhydrous 127-09-3 and Trihydrate 6131-90-4
We at Muby Chemicals are Sodium Acetate Manufacturer.
We manufacture Sodium Acetate IP, Sodium Acetate BP, Sodium Acetate USP, Sodium Acetate FCC Food Grade, Sodium Acetate ACS or Analytical Reagent, Sodium Acetate EP, Technical and Pure Grade. We also offer Pellets, Tablets and Bricks.
You can take a quick glimpse of Sodium Acetate General Specifications in the table below. For more information, please click the links above.
GRADES AND SPECIFICATIONS OF SODIUM ACETATE TRI-HYDRATE CRYSTALS
| SPECIFICATIONS | SODIUM ACETATE TRIHYDRATE PURE | SODIUM ACETATE TRIHYDRATE TECHNICAL |
| Assay | 99% Sodium Acetate Trihydrate minimum | 98% Sodium Acetate Trihydrate minimum |
| Appearance | White Transparent Crystalline | Off-White Crystalline |
| Test Solution | A 10% Solution is clear & colourless | A 10% Solution is clear & colourless |
| pH | 7.5-9 | 7.5-9 |
| Arsenic | Less than 1 ppm | Less than 1 ppm |
| Calcium & Magnesium | Less than 50 ppm | Less than 100 ppm |
| Heavy Metals | Less than 1 ppm | Less than 10 ppm |
| Iron | Less than 5ppm | Less than 10 ppm |
| Chlorides | Less than 0.03% | Less than 0.5% |
| Sulphates | Less than 0.02% | Less than 0.5% |
GRADES AND SPECIFICATIONS OF SODIUM ACETATE ANHYDROUS POWDER.
| SPECIFICATIONS | SODIUM ACETATE ANHYDROUS PURE | SODIUM ACETATE ANHYDROUS TECHNICAL |
| Purity | 99 % minimum purity as CH3COONa | 98.5% minimum purity as CH3COONa |
| Appearance | Snow-White Powder | White to Off-White Powder |
| Clarity of 10% Solution | A 10% Solution w/v is clear and colourless | A 10% Solution w/v is clear |
| pH (10% in water) | pH between 7.5-9 | pH between 7.5-9 |
| Arsenic | Arsenic < 1ppm. | Arsenic < 1ppm. |
| Calcium and Magnesium | To pass the test 50 ppm | To pass the test 100 ppm |
| Heavy Metals | Heavy Metals < 1ppm | Heavy Metals < 10ppm |
| Iron | Iron < 5ppm | Iron < 10ppm |
| Chloride | Chloride < 100ppm | Chloride <0.5% |
| Sulphate < 225ppm | Sulphate < 20ppm | Sulphate <0.5% |
Sodium Acetate USP Grade Specifications
Sodium Acetate USP
C2H3NaO2-3H2O -- 136.08
Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Sodium Acetate Trihydrate BP Ph Eur Grade Specifications
Sodium Acetate BP
C2H3NaO2-3H2O
Action and use
Used in solutions for dialysis; excipient.
DEFINITION
Sodium ethanoate trihydrate.
Content
99.0 per cent to 101.0 per cent (dried substance).
CHARACTERS
Appearance
Colourless crystals.
Solubility
Very soluble in water, soluble in ethanol (96 per cent).
IDENTIFICATION
A. 1 ml of solution S (see Tests) gives reaction (b) of acetates.
B. 1 ml of solution S gives reaction (a) of sodium.
C. Loss on drying (As shown in the Relevant Test).
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
7.5 to 9.0.
Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Reducing substances
Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Chlorides
Maximum 200 ppm.
Sulphates
Maximum 200 ppm.
Aluminium
Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium
Maximum 50 ppm, calculated as Ca.
Heavy metals
Maximum 10 ppm.
Iron
Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying
39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130C.
Sodium Acetate FCC Food Grade Grade Specifications
C2H3NaO2 Formula weight, anhydrous 82.03
C2H3NaO2-3H2O Formula weight, trihydrate 136.08
DESCRIPTION
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Function: Buffer.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Acetate.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.
Sodium Acetate Anhydrous Analytical Reagent Grade Specifications
Sodium Acetate Anhydrous
CH3COONa
Formula Weight 82.03
CAS Number 127-09-3
REQUIREMENTS
Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Acetate Trihydrate Analytical Reagent Grade Specifications
NaC2H3O2-3H2O
Formula Weight 136.08
CAS Number 6131-90-4
REQUIREMENTS
Assay: 99.0-101% NaC2H3O2 . 3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes test
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%.
Sodium Acetate is manufactured by the reaction of Soda Ash with Acetic Acid. The reaction is exothermic. To control heat the reaction is done in a very large volume of liquor.
Na2CO3 + 2CH3COOH → 2CH3COONa + H2O +CO2 and Heat.
Crystals are formed after evaporation of the reacted liquor and the material is centrifuged and dried. The material so produced is very high quality and the first crop is surpassing all the standards.
We offer Sodium Acetate IP Sodium Acetate BP Sodium Acetate USP and Extra Pure from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals
We also offer Sodium Acetate Tablets and Granules.
Sodium Acetate
Sodium Acetate Tablet
Sodium Acetate Pure Trihydrate Crystals Anhydrous IP BP Ph Eur USP AR ACS Analytical Reagent FCC Food Grade Manufacturers:
Muby Chemicals & Associated Cos
BANDEALI BUILDING, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: 91-22-65290109. Gujarat & Mumbai India.
info(At the Rate i.e. @)mubychem(dot)com
Copyright and Usual Disclaimer is Applicable
Last updated 27-mar-26
Exports to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico etc.
Barter
They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.
They assign the credit of their hard work to your blessings
They keep you amused.
They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.
They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.
They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.
They offer you a small bribe as advance for booty, called lottery
They love to dream.
I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you.