Potassium Chloride Pure & IP BP Ph Eur USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Muby chemicals, is the flagship company in Mubychem Group, established in 1976, It has several manufacturing units in its wings, making Inorganic Chemicals including Potassium Chloride, Pharmaceutical Excipients & Flavour Chemicals in India. Mubychem Group has manufacturing facilities spread across Western India and sales purchase agents in several countries. The associated manufacturing units are accredited with certifications like FDA cGMP and GLP Approval, ISO-9001 ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Certification, "REACH" registration, Kosher, Halal & HACCP Certification.

We are chemical supplier exporter to almost every country and have a representatives in major business areas. We serve from small packs to container loads.

We manufacture Potassium Chloride IP, Potassium Chloride BP EP Ph. Eur., Potassium Chloride USP, Potassium Chloride FCC Food Grade, Potassium Chloride ACS or AR, Potassium Chloride EP, Technical and Pure Grade. We also offer Pellets, Tablets and Bricks.

You can take a quick glimpse of Potassium Chloride General Specifications in the table below.

Potassium Chloride Technical Grade

Specification	Technical
KCl Dry Basis Assay (DBA)	98% min KCl Potassium Chloride
K2O	60% min
Iron	100 ppm
Matter insoluble in water	0.1% max
Moisture % by Wt. Max.	1%

Potassium Chloride Pure used as a Potassium source, in electroplating, etc.

Specification	As per IS:4150-1984 Grade 1	Our Guaranteed
Percent by wt.	98% (KCl) Potassium Chloride	99% (KCl) Potassium Chloride
Iron	20 ppm	10 ppm
Sodium Chloride	1.5%	1%
Matter insoluble in water	0.5%	0.05%
Sulphate	0.6%	0.05%
Heavy metals as Lead	Not specified	5 ppm
Hydroxides	Not specified	.01%
Calcium	0.2%	0.02%
Magnesium	0.07%	0.05%
Moisture % by Wt. Max.	2.0%	1%

Muby Chemicals, established in 1976, is the pioneer manufacturer of Chlorides, and particularly Potassium Chloride and various other chemicals in India. Muby chemicals know about Potassium Chloride better than any other vendor in the world.

We also offer free flowing potassium chloride food grade with suitable anti caking agent as required by the buyer.

Assay— Potassium Chloride contains not less than 99.0 percent and not more than 100.5 percent of KCl, calculated on the dried basis.
Labeling— Where intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Potassium and for Chloride.
Acidity or alkalinity— To a solution of 5.0 g in 50 mL of carbon dioxide–free water add 3 drops of phenolphthalein TS: no pink color is produced. Then add 0.30 mL of 0.020 N sodium hydroxide: a pink color is produced.
Loss on drying— Dry it at 105 for 2 hours: it loses not more than 1.0% of its weight.
Iodide or bromide—
IODIDE—
Standard stock solution— Transfer an accurately weighed quantity, about 41 mg, of potassium iodide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix.
Standard solution— Dilute 1.0 mL of Standard stock solution with water to 25 mL, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with “Add 1 mL each of chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 2 drops of a chloramine T solution (0.1 in 100), and shake gently. The violet color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.005%.
BROMIDE—
Standard solution— Transfer an accurately weighed quantity, about 32 mg, of sodium bromide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with “Add 1 mL each of chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 5 drops of a chloramine T solution (1 in 100), and shake gently. The brown color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.1%.
Aluminum— where it is labeled as intended for use in hem dialysis— Proceed as directed using 2.0 g of Potassium Chloride to prepare the Test Preparation: the limit is 1 µg per g.
Calcium and magnesium— To 20 mL of a solution (1 in 100) add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Sodium— A solution (1 in 20), tested on a platinum wire, does not impart a pronounced yellow color to a non-luminous flame.
Heavy metals— Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Organic volatile impurities: meets the requirements.

CHARACTERS
Appearance
White or almost white, crystalline powder or colorless crystals.
Solubility
Freely soluble in water, practically insoluble in anhydrous ethanol.

IDENTIFICATION
It gives the reactions of chlorides.
Solution S gives the reactions of potassium.

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colorless.
Acidity or alkalinity: To 50 ml of solution S add 0.1 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator.
Bromides: Maximum 0.1 per cent.
Iodides: Moisten 5 g by the drop wise addition of a freshly prepared mixture of 0.15 ml of sodium nitrite solution, 2 ml of 0.5 M sulphuric acid, 25 ml of iodide-free starch solution and 25 ml of water. After 5 min, examine in daylight. The substance shows no blue color.
Sulphates: Maximum 300 ppm.
Aluminium: Maximum 1.0 ppm, if intended for use in the manufacture of hem dialysis solutions.
Barium: To 5 ml of solution S add 5 ml of distilled water and 1 ml of dilute sulphuric acid. After 15 min, any opalescence in the solution is not more intense than that in a mixture of 5 ml of solution S and 6 ml of distilled water.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Sodium: Maximum 0.10 per cent, if intended for use in the manufacture of parenteral preparations or hem dialysis solutions.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 C for 3h.

DESCRIPTION: Potassium Chloride occurs as colorless, elongated, prismatic, or cubical crystals, or as a white, granular powder. It is stable in air. Its solutions are neutral to litmus. It may contain up to 1.0% (total) of suitable food-grade ant-caking, free-flowing, or conditioning agents such as calcium stearate or silicon dioxide, either singly or in combination. One gram dissolves in 2.8 mL of water at 25°, and in about 2 mL of boiling water. Potassium Chloride containing anti-caking, free-flowing, or conditioning agents may produce cloudy solutions or dissolve incompletely. It is insoluble in alcohol.
Function: Nutrient; gelling agent; salt substitute; yeast food.

REQUIREMENTS:
Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Chloride.
Assay: Not less than 99.0% of KCl after drying; and not less than 98.0% of KCl after drying when a sample contains added substance.
Acidity or Alkalinity: A sample containing no added substance passes test.
Heavy Metals (as Pb): Not more than 5 mg/kg.
Iodide and/or Bromide: Passes test.
Loss on Drying: Not more than 1.0%.
Sodium: Passes test.

REQUIREMENTS
Assay: ---------------------- 99.0-100.5% KCl
pH of a 5% solution --------- 5.4-8.6 at 25C

MAXIMUM ALLOWABLE
Insoluble matter ------------ 0.005%
Iodide (I) ------------------ 0.002%
Bromide (Br) ---------------- 0.01%
Chlorate and nitrate (as NO3) 0.003%
Nitrogen compounds (as N) --- 0.001%
Phosphate (PO4) ------------- 5 ppm
Sulfate (SO4) --------------- 0.001%
Barium (Ba) ----------------- Passes test
Heavy metals (as Pb) -------- 5 ppm
Iron (Fe) ------------------- 3 ppm
Calcium (Ca) ---------------- 0.002%
Magnesium (Mg) -------------- 0.001%
Sodium (Na) ----------------- 0.005%.

We offer Technical, Pure, IP, BP EP Ph. Eur. USP FCC Food grade of the product. We do not offer Mineral Potassium Muriate or Potassium MOP-fertilizer.

Potassium Chloride Pure & BP Ph Eur IP USP ACS Analytical Reagent FCC Food Grade Manufacturers:

Muby Chemicals & Associated Cos
BANDEALI BUILDING, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: 91-22-23728264. Gujarat & Mumbai India.

Exports to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico etc.

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you.