Manganese Chloride Pure & USP ACS Reagent FCC Manufacturers |
Muby chemicals, is the flagship company in Mubychem Group, established in 1976, It has several manufacturing units in its wings, making Inorganic Chemicals, including Manganese Chloride, Pharmaceutical Excipients & Flavour Chemicals in India. Mubychem Group has manufacturing facilities spread across Western India and sales purchase agents in several countries. The associated manufacturing units are accredited with certifications like FDA cGMP and GLP Approval, ISO-9001 ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Certification, "REACH" registration, Kosher, Halal & HACCP Certification. |
| We are chemical supplier exporter to almost every country and have a representatives in major business areas. We serve from small packs to container loads. |
-------- 
CAS Number anhydrous 7773-01-5 and tetrahydrate 13446-34-9
We manufacture Manganese Chloride Tetrahydrate and Anhydrous in various grades like, Manganese Chloride FCC Grade. ACS, AR Analytical Reagent Grade, Commercial Pure etc.
Specifications of Manganese Chloride Tetrahydrate
It occurs as large, irregular, pink, translucent crystals. It is freely soluble in water at room temperature and very soluble in hot water.
Assay: Not less than 98.0% and not more than 102.0% of MnCl2-4H2O.
Insoluble Matter: Not more than 0.005%.
Iron: Not more than 5 mg/kg.
Lead: Not more than 4 mg/kg.
pH of a 5% Solution: Between 4.0 and 6.0.
Substances Not Precipitated by Sulfide: Not more than 0.2%, after ignition.
Sulfate: Not more than 0.005%.
Manganese Chloride Tetrahydrate USP Grade
MnCl2-4H2O --- 197.90
Manganese (2+) chloride tetrahydrate CAS 13446-34-9
Anhydrous 125.84 CAS 7773-01-5
Manganese Chloride contains not less than 98.0 percent and not more than 101.0 percent of MnCl2, calculated on the dried basis.
Identification:
A: Yields white, curdy precipitate of silver chloride with silver nitrate TS, which is insoluble in nitric acid. After being washed with water, this precipitate is soluble in a slight excess of 6 N ammonium hydroxide.
B: It meets the requirements of the test for Manganese.
pH: between 3.5 and 6.0, 10 g dissolved in 200 mL of carbon dioxide- and ammonia-free water being used.
Loss on drying: Dry it at 50 for 2 hours, then raise the temperature to 150 for 24 hours: it loses between 36.0% and 38.5% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 150 mL of water, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and pass through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C: the residue weighs not more than 0.5 mg (0.005%).
Sulfate: A 2.0 g portion shows no more sulfate than corresponds to 0.10 mL of 0.020 N sulfuric acid (0.005%).
Substances not precipitated by ammonium sulfide: Dissolve 2.0 g in about 90 mL of water, add 5 mL of ammonium hydroxide, and warm the solution to about 80 . Pass a stream of hydrogen sulfide through the solution for 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a fine-porosity filter, and transfer 50.0 mL to an evaporating dish that previously has been ignited and tared. Evaporate the filtrate to dryness, cool, add 0.5 mL of sulfuric acid, heat gently to remove the excess acid, and ignite at 800 ± 25 for 15 minutes: the weight of the residue is not greater than 2.0 mg (0.2% as sulfate).
Iron: Dissolve 2.0 g in 40 mL of water: the limit is 5 µg per g.
Zinc: Dissolve 1 g in a mixture of 48 mL of water and 2 mL of sulfuric acid, and add, slowly and with constant agitation, 1 mL of potassium ferrocyanide solution (1 in 100): no turbidity is produced within 5 minutes.
Heavy metals: the limit is 5 µg per g.
Manganese Chloride Tetrahydrate as per ACS Reagent Grade Specifications
Reagent: Manganese Chloride Tetrahydrate as per ACS specifications
Manganese Chloride Tetrahydrate ACS
Manganese (II) Chloride TetrahydrateManganous Chloride Tetrahydrate
Molecular Formula: MnCl2-4H2O
Molecular Weight: 197.90
CAS Number 13446-34-9
EINECS EC Number: 231-869-6
REQUIREMENTS
Assay: 98.0-101.0% MnCl2-4H2O
pH of a 5% solution: 3.5-6.0 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Sulfate (SO4): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%
TESTS
ASSAY: (By complexometric titration of Mn). Weigh accurately 0.8g, transfer to a 500-mL beaker, and dissolve in 200 mL of water. Add a few milligrams of ascorbic acid to prevent oxidation. From a burette, add about 30 mL of standard 0.1 M EDTA. Now add 10 mL of pH 10 ammoniacal buffer solution and about 50 mg of Eriochrome Black T indicator mixture. Continue the titration with EDTA to a clear blue color (and disappearance of the last trace of red). One milliliter of 0.1 M EDTA corresponds to 0.01979 g of MnCl2 . 4H2O.
% MnCl2 · 4H2O = (mL × M EDTA × 19.79) / Sample wt (g)
pH OF A 5% SOLUTION: The pH should be 3.5-6.0 at 25C.
INSOLUBLE MATTER: Use 20 g dissolved in 150 mL of water.
SULFATE: Dissolve 10 g in 100 mL of water, add 1 mL of hydrochloric acid, filter, and heat the filtrate to boiling. Add 10 mL of barium chloride reagent solution, digest in a covered beaker on a hot plate (about 100C) for 2 h, and allow to stand overnight. If a precipitate is formed, filter through a fine ash less paper, wash thoroughly, and ignite. Correct for the weight obtained in a complete blank test.
IRON. Use 2.0 g.
CALCIUM, MAGNESIUM, POTASSIUM, SODIUM, AND ZINC: (By flame AAS 39).
To pass the test
Manganese Chloride FCC Grade Specifications
MnCl2 Formula weight, anhydrous 125.84
MnCl2·4H2O Formula weight, tetrahydrate 197.91
CAS: anhydrous 7773-01-5
CAS: tetrahydrate 13446-34-9
DESCRIPTION
It occurs as large, irregular, pink, translucent crystals. It is freely soluble in water at room temperature and very soluble in hot water.
Function: Nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Manganese and for Chloride.
Assay: Not less than 98.0% and not more than 102.0% of MnCl2·4H2O.
Insoluble Matter: Not more than 0.005%.
Iron: Not more than
5 mg/kg.
Lead: Not more than
4 mg/kg.
pH of a 5% Solution: Between 4.0 and 6.0.
Substances Not Precipitated by Sulfide: Not more than 0.2%, after ignition.
Sulfate: Not more
than 0.005%.
Manganese Chloride
Manganese Chloride USP ACS AR Analytical Reagent Manganese Chloride FCC Food Grade Manufacturers
Muby Chemicals & Associated Cos
BANDEALI BUILDING, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: 91-22-23728264. Gujarat & Mumbai India.
info(At the Rate i.e. @)mubychem(dot)com
Copyright and Usual Disclaimer is Applicable
Last updated
3-sep-22
Exports to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico etc.
Barter
They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.
They assign the credit of their hard work to your blessings
They keep you amused.
They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.
They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.
They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.
They offer you a small bribe as advance for booty, called lottery
They love to dream.
I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you.