Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution IP BP Ph Eur USP ACS Analytical Reagent Food Grade Manufacturers.

Muby chemicals, is the flagship company in Mubychem Group, established in 1976, It has several manufacturing units in its wings, making Inorganic Chemicals including Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution, Pharmaceutical Excipients & Flavour Chemicals in India. Mubychem Group has manufacturing facilities spread across Western India and sales purchase agents in several countries. The associated manufacturing units are accredited with certifications like FDA cGMP and GLP Approval, ISO-9001 ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Certification, "REACH" registration, Kosher, Halal & HACCP Certification.

We are chemical supplier exporter to almost every country and have a representatives in major business areas. We serve from small packs to container loads.

Calcium Chloride Anhydrous CAS Number 10043-52-4, Calcium Chloride Dihydrate CAS Number 10035-04-8 and Calcium Chloride Hexahydrate CAS Number 7774-34-7

We manufacture Calcium Chloride IP, Calcium Chloride BP EP Ph. Eur., Calcium Chloride USP, Calcium Chloride FCC Food Grade, Calcium Chloride ACS or AR, Calcium Chloride EP, CaCl2 Technical and Pure Grade of Anhydrous, Fused, Powder. We also offer Pellets and Tablets.

You can take a quick glimpse of Calcium Chloride General Specifications in the table below.

CaCl2- Calcium Chloride Food Grade and Pharma Grade

Particulars	Calcium Chloride Anhydrous	Calcium Chloride Dihydrate
Assay	93% min. CaCl2 Calcium Chloride Anhydrous	97 to 103% as CaCl2.2H2O Di-hydrate
Arsenic	0.0003% max. 3 ppm. max.	0.0003% max. <3 ppm
Lead (Pb)	0.001% max. 10 ppm. max.	0.001% max. <10 ppm.
Heavy Metal as (Pb)	0.0003% max. 3 ppm. max.	0.0003% max. <3 ppm.
Magnesium/Alkali	1% max	1% max.
Clarity of 10% Soln.	Clear & Colourless	Clear & Colourless
Free Acid or Alkali	0.005%max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10%	0.005%max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10%

Calcium Chloride Dihydrate & AR Analytical Reagent Grade

CaCl2.2H2O EXTRA PURE; A. R. MERCK SPECIFICATIONS.
Assay Calcium Chloride Dihydrate CaCl2.2H2O	97%-103%. as CaCl2.2H2O Calcium Chloride Dihydrate
Free Acid or Alkali	0.005% Max. as HCl OR Ca(OH)2.
Sulphate (SO4)	0.01% Max.
Iron	0.001% Max.
Magnesium	0.05% Max.

Calcium Chloride Hexahydrate (EXTRA PURE)

CaCl2.6H2O EXTRA PURE; A. R. MERCK SPECIFICATIONS.
Assay Calcium Chloride Hexahydrate CaCl2.6H2O	99%-101%. as CaCl2.6H2O Calcium Chloride Hexahydrate
Free Acid or Alkali	0.005% Max. as HCl OR Ca(OH)2.
Sulphate (SO4)	0.01% Max.
Iron	0.001% Max.
Magnesium	0.05% Max.

We offer Calcium Chloride IP, Calcium Chloride BP, Calcium Chloride USP Calcium Chloride Ph. Eur. Calcium Chloride FCC or Food Grade from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals

Calcium Chloride is manufactured by reaction of good quality Calcium Carbonate like calcite with Hydrochloric Acid. The reaction is exothermic and steps need to be taken to control the escape of Acid fumes.

A solution of Calcium Chloride is obtained. It is filtered and evaporated in multiple effect evaporators. The resultant concentrated liquor is then cooled to get crystals of Calcium Chloride Dihydrate.

Calcium Chloride Dihydrate so obtained is then dried in a rotary drier or in a muffle furnace to get Calcium Chloride Anhydrous.

The tricky point comes when the desired grade is Calcium Chloride Dihydrate or Calcium Chloride Hexahydrate. A specific grade can be obtained as crystals of Calcium Chloride Dihydrate or any other hydrate by controlled cooling of the evaporated liquor. Experience is the only key to getting good grade of crystals. Apart from making crystalline Calcium Chloride, we also make fused, anhydrous, lumps, granules, powder and tablets of Calcium Chloride.

Assay— Calcium Chloride contains an amount of CaCl2 equivalent to not less than 99.0 percent and not more than 107.0 percent of CaCl2·2H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where Calcium Chloride is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 10) responds to the tests for Calcium and for Chloride.
pH: between 4.5 and 9.2, in a solution (1 in 20).
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 4g per g.
Iron, aluminum, and phosphate— To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid and 1 drop of phenolphthalein TS. Then add ammonium chloride–ammonium hydroxide TS, drop wise, until the solution is faintly pink, add 2 drops in excess, and heat the liquid to boiling: no turbidity or precipitate is produced.
Heavy metals— the limit is 0.001%.
Limit of magnesium and alkali salts— Dissolve 1 g in about 50 mL of water, add 500 mg of ammonium chloride, and proceed as directed in the test for Limit of magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute”: the weight of the residue does not exceed 5 mg (1.0%).
Organic volatile impurities meets the requirements.

CHARACTERS
Appearance
White or almost white, crystalline powder, hygroscopic.
Solubility
Freely soluble in water, soluble in ethanol (96 per cent).

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clearand not more intensely colored than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the color and if the solution is colorless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 300 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia and boil the solution. No turbidity or precipitate is formed.
If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for Aluminium maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium Sulphate solution R. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 10 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.

CHARACTERS
Appearance
White or almost white, crystalline mass or colorless crystals.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
It solidifies at about 29C.

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S
Dissolve 15.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the color and if the solution is colorless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 200 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia R1 . Heat to boiling. No turbidity or precipitate is formed. If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for Aluminium : maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium Sulphate solution. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 7 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.3 per cent.
Heavy metals Maximum 15 ppm.

Calcium Chloride Injection is a sterile solution of Calcium Chloride in Water for Injection. It contains not less than 95.0 percent and not more than 105.0 percent of the labeled amount of CaCl2-2H2O.

Packaging and storage— Preserve in single-dose containers, preferably of Type I glass.
Identification— It responds to the tests for Calcium and Chloride.
Bacterial end toxins— It contains not more than 0.2 USP End toxin Unit per mg of calcium chloride.
pH: between 5.5 and 7.5 in the undiluted Injection, except where the concentration is greater than 1 in 20, in which case this range applies to the Injection diluted with water to yield a concentration of 1 in 20.
Particulate matter: meets the requirements for small-volume injections.
Other requirements— It meets the requirements under Injections 1.

CaCl2 Formula weight, anhydrous 110.98
CaCl2-2H2O Formula weight, dihydrate 147.01
Calcium Chloride

DESCRIPTION
Calcium Chloride occurs as white, hard fragments, granules, or powder. It is anhydrous or contains two molecules of water of hydration. It is deliquescent. It is soluble in water and slightly soluble in alcohol. The pH of a 1:20 aqueous solution is between 4.5 and 11.0.
Function Firming agent.

REQUIREMENTS
Labeling: Indicate whether it is anhydrous or the dihydrate.
Identification: A 1:10 aqueous solution gives positive tests for Calcium and for Chloride.
Assay: Anhydrous: Not less than 93.0% and not more than 100.5% of CaCl2; Dihydrate: Not less than 99.0% and not more than 107.0% of CaCl2·2H2O.
Acid-Insoluble Matter Anhydrous: Not more than 0.02%; no particles per kilogram of sample greater than 2 mm in any dimension.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.004%.
Lead: Not more than 5 mg/kg.
Magnesium and Alkali Salts Anhydrous: Not more than 5.0%; Dihydrate: Not more than 4.0%.

DESCRIPTION
Calcium Chloride Solution occurs as a clear to slightly turbid, colorless or slightly colored liquid at room temperature. It is normally available in a concentration range of about 35% to 45% of CaCl2.
Function: Sequestrant; firming agent.

REQUIREMENTS
Identification: When diluted to a concentration of about 1:10 (CaCl2 basis), a sample gives positive tests for Calcium and for Chloride.
Assay: Not less than 90.0% and not more than 110.0%, by weight, of the labeled amount of calcium chloride, expressed as CaCl2.
Alkalinity [as Ca(OH)2]: Not more than 0.3%.
Fluoride: Not more than 0.004%, calculated on the amount of CaCl2 as determined in the Assay.
Lead: Not more than 4 mg/kg, calculated on the amount of CaCl2 as determined in the Assay.
Magnesium and Alkali Salts: Not more than 5.0%, calculated on the amount of Calcium Chloride as determined in the Assay.

REQUIREMENTS
Assay: 99.0-105.0% CaCl2 - 2H2O
pH of a 5% solution: 4.5-8.5 at 25C

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Oxidizing substances (as NO3): 0.003%
Sulfate (SO4): 0.01%
Ammonium (NH4): 0.005%
Barium (Ba): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Magnesium (Mg): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.02%
Strontium (Sr): 0.1%

Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution Powder Manufacturers
Calcium Chloride IP BP Ph Eur USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Muby Chemicals & Associated Cos
BANDEALI BUILDING, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: 91-22-23728264. Gujarat & Mumbai India.

Exports to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico etc.

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you.

Calcium Chloride Fused; Hard Solid	Calcium Chloride Double Fused; Porous	Calcium Chloride Anhydrous
Calcium Chloride Fused 72-75% Assay	Calcium Chloride Porous Fused 80% Assay	Calcium Chloride Anhydrous 94-98% Assay
Appearance White Lumps	Appearance White Lumps or Powder	Appearance White Lumps or Powder
Magnesium 0.3% max.	Magnesium 0.3% max.	Magnesium 0.3% max.
Iron 100 ppm max.	Iron 100 ppm max.	Iron 100 ppm max.
Dry Basis Assay 98% min.	Dry Basis Assay 98% min.	Dry Basis Assay 98% min.
In 50 Kgs. HDPE bag with HMHDP liner.	In 50 Kgs. HDPE bag with HMHDP liners	In 50 Kgs. HDPE bag with HMHDP liners

Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution IP BP Ph Eur USP ACS Analytical Reagent Food Grade Manufacturers.

Specifications and Grades of Calcium Chloride

CaCl2- Calcium Chloride Food Grade and Pharma Grade

Calcium Chloride Dihydrate & AR Analytical Reagent Grade

Calcium Chloride Hexahydrate (EXTRA PURE)

Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution Powder Manufacturers Calcium Chloride IP BP Ph Eur USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Calcium Chloride Anhydrous Fused Dihydrate Hexahydrate Solution Powder Manufacturers
Calcium Chloride IP BP Ph Eur USP ACS AR Analytical Reagent FCC Food Grade Manufacturers