Muby chemicals, is the flagship company in Mubychem Group, established in 1976, It has several manufacturing units in its wings, making Inorganic Chemicals Pharmaceutical Excipients, Fragrances & Flavour Chemicals in India. Mubychem Group has manufacturing facilities spread across Western India and sales purchase agents in several countries. The associated manufacturing units are accredited with certifications like FDA) GMP Approval, ISO-9001:2008 & ISO-22000:2005 Certification, "REACH" Pre-registration, Kosher, Halal & HACCP Certification.
MSDS of Chromium Chloride Chromic Chloride USP Manufacturers
Chromium Chloride Pure & Chromic Chloride USP Manufacturers CrCl2.6H2OSpecifications of Chromium Chloride or Chromic Chloride:
Chromic Chloride or Chromium Chloride contains not less than 98.0 percent and not more than 101.0 percent of CrCl3·6H2O.
Substances not precipitated by ammonium hydroxide— (0.20% as sulfate).
Iron— The limit is 0.01%.
Chromic Chloride USP - Chromium Chloride
Chromium chloride (CrCl3) hexahydrate.
Chromium(3+) chloride hexahydrate [10060-12-5].
Anhydrous 158.36 [10025-73-7].
Chromium Chloride - Chromic Chloride or Chromium Chloride contains not less than 98.0 percent and not more than 101.0 percent of CrCl3·6H2O.
Insoluble matter— Transfer 10 g to a 250-mL beaker, add 100 mL of water, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 30 minutes, and filter through a tarred filtering crucible of fine porosity. Rinse the beaker with hot water, passing the rinsing through the filter, and wash the filter with hot water until the last washing is colorless. Dry the filter at 105oC the weight of the residue does not exceed 1 mg (0.01%).
Substances not precipitated by ammonium hydroxide— Dissolve 2.0 g of Chromic Chloride or Chromium Chloride in 80 mL of water, heat the solution to boiling, and add a slight excess of ammonium hydroxide. Continue heating to remove the excess ammonia, cool, dilute with water to 100.0 mL, and mix. Pass through a retentive filter, and transfer 50.0 mL of the clear filtrate to an evaporating dish that previously has been ignited and tarred. Add 0.5 mL of sulfuric acid to the filtrate, evaporate on a steam bath to dryness, heat gently to remove the excess acid, and ignite gently: the weight of the residue does not exceed 2.0 mg (0.20% as sulfate).
Sulfate— Prepare a test solution by dissolving 2.0 g in 10 mL of water. Add 1 mL of 3 N hydrochloric acid, filter if necessary to obtain a clear solution, wash the filter with two 5-mL portions of water, and dilute with water to 40 mL. Prepare a control solution in a similar manner, but use 1.0 g of the substance under test, and after the filtration step add 0.10 mL of 0.020 N sulfuric acid. To each solution add 3 mL of barium chloride TS, mix, and allow to stand overnight. Decant most of the supernatants, without disturbing the precipitates, but leaving twice the volume of liquid in the control solution as in the test solution. Dilute each solution with water to 25 mL, and sonicate for 1 minute: any turbidity in the test solution does not exceed that in the control solution (0.01%).
Iron— Dissolve 1.0 g of Chromic Chloride or Chromium Chloride in 100 mL of water, and mix. Transfer 10 mL of this solution to a 100-mL color comparison tube, dilute with water to 45 mL, add 2 mL of hydrochloric acid, and mix (Test Preparation). Proceed as directed for Procedure, except to add 15 mL of butyl alcohol to the Test Preparation and the Standard Preparation at the same time that the Ammonium Thiocyanate Solution is added. Shake for 30 seconds, and allow the layers to separate: the color in the upper butyl alcohol layer from the Test Preparation is not darker than that from the Standard Preparation. The limit is 0.01%.
Assay— Dissolve about 0.4 g of Chromic Chloride or Chromium Chloride, accurately weighed, in 100 mL of water contained in a glass-stoppered, 500-mL conical flask, add 5 mL of 5 N sodium hydroxide, and mix. Pipette, slowly, 4 mL of 30 percent hydrogen peroxide into the flask, and boil the solution for 5 minutes. Cool the solution slightly, and add 5 mL of nickel sulfate solution (1 in 20). Boil the solution until no more oxygen is evolved, cool, and add 2 N sulfuric acid drop wise until the color of the solution changes from yellow to orange. Add to the flask a freshly prepared solution of 4 g of potassium iodide and 2 g of sodium bicarbonate in 100 mL of water, then add 6 mL of hydrochloric acid. Immediately insert the stopper in the flask, and allow to stand in the dark for 10 minutes. Rinse the stopper and the sides of the flask with a few mL of water, and titrate the liberated iodine with 0.1 N sodium thiosulfate VS to an orange color. Add 3 mL of starch TS, and continue the titration to a blue-green endpoint. Each mL of 0.1 N sodium thiosulfate is equivalent to 8.882 mg of CrCl3·6H2O.
Chromium Chloride Pure & Chromic Chloride USP Manufacturers at:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: (Off.) 91-22-23770100, 23726950. FAX: 91-22-23728264.
Copyright and Usual Disclaimer is Applicable
Last updated 13-jul-16
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favour that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again.
Muby.in Pharmaceutical IP BP USP Grades of Chemicals Ammonium Chloride Benzyl Alcohol BP Benzyl Alcohol USP, ACS Boric Acid USP-NF, BP Borax BP, USP-NF, ACS Boric Acid IP, ACS Calcium Chloride Calcium Hydroxide BP, USP Calcium Hydroxide FCC, ACS Calcium Oxide FCC, USP Calcium Saccharate Calcium Sulfate USP, BP Calcium Sulfate FCC, ACS Chromic Chloride USP, Chromium Chloride Gentian Violet USP, Crystal violet BP Magnesium Chloride BP, IP Magnesium Chloride USP-NF, FCC, ACS Magnesium Sulphate BP, IP Magnesium Sulfate USP, FCC ACS Manganese Chloride FCC, ACS Manganese Sulphate BP, Manganese Sulfate USP Manganese Sulfate ACS, FCC Magnesium Chloride Methyl-thioninium Chloride BP, Methylene Blue USP Maleic acid Potassium bromide Potassium Chloride Potassium nitrate Potassium nitrite Potassium Phosphate Sodium Acetate Sodium Bicarbonate BP, IP Sodium Bicarbonate USP, FCC, ACS Sodium Diacetate Sodium Phosphate Sodium propionate Sodium Thiosulphate Sodium Thiosulfate BP-USP-IP Sodium Thiosulfate-ACS-FCC-Food Sodium Hydroxide Pellets USP-NF FCC ACS Caustic Soda Pellets BP IP Sodium nitrite Sodium nitrate Zinc Chloride Other Chemical Products Ammonium Phosphate Ammonium persulfate Barium chloride Calcium propionate Ceric ammonium nitrate Cupric Chloride Calcium Nitrite Nitrate Isatoic Anhydride HEDP Hhydroxyethylidene diphosphonic acid Potassium Iodide Sodium Bromide Sodium Formaldehyde Bisulfite
Phase Change Material
Exports to USA UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico etc.
They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.
They assign the credit of their hard work to your blessings
They keep you amused.
They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.
They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.
They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.
They offer you a small bribe as advance for booty, called lottery
They love to dream.
I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you